1-2
Installation Guidelines
Compaq Confidential - Need to Know Required
Writer:
Martha Rockecharlie
Part Number:
123456-001
File Name:
d-Installation
Last Saved On:
07/24/00 2:05 PM
Last Saved By:
Kristen Cover
2. If the computer is already on, turn it off and disconnect the power
cord from the wall outlet.
!
WARNING:
To reduce the risk of personal injury from electrical
shock and/or hot surfaces, be sure to disconnect the power cord from
the wall outlet, and allow the internal system components to cool
before touching.
!
WARNING:
To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug telecommunications/telephone connectors
into the network interface controller (NIC) receptacles.
CAUTION:
Static electricity can damage the electronic components
of the computer or optional equipment. Before beginning these
procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object. Refer to Appendix E,
“Electrostatic Discharge,” for more information.
3. Open the computer by removing its outside cover. Refer to the
procedures for removing the computer cover or access panel.
4. Install any optional equipment. Refer to the applicable sections of
this guide or to the documentation provided with the optional
equipment for instructions.
5. Replace the computer cover.
6. Turn on the monitor, computer, and any devices you want to test.
7. Reconfigure the computer, if necessary. Refer to the
Computer
Setup
guide for instructions about using Computer Setup.
If you normally lock the Smart Cover Lock, use Computer Setup to
relock the lock and enable the cover removal sensor.
Summary of Contents for 133756-004 - Deskpro EN - 6550 Model 6400
Page 1: ...rence Guide sonal Computers ...
Page 48: ......
