manualshive.com logo in svg

Compaq 133756-004 - Deskpro EN - 6550 Model 6400, Hardware Reference Manual

Share
Download
Compaq 133756-004 - Deskpro EN - 6550 Model 6400 Hardware Reference Manual Download Page 24

2-16

    Hardware Upgrades

Compaq Confidential - Need to Know Required

Writer:

 Martha Rockecharlie 

Part Number:

 178171-xx2 

File Name:

 e-UpgradesSDT

Last Saved On:

 07/25/00 9:22 AM 

Last Saved By:

 Kristen Cover

Removing a CD-ROM Drive from the Drive Cage

1.  If you have locked the Smart Cover Lock, use Computer Setup to

unlock the lock and disable the Smart Cover Sensor.

2.  Shut down the operating system properly, turn off the computer,

disconnect the power cord from the electrical outlet, and remove
the computer cover.

3.  Disconnect the drive power cable, signal cable, and audio

connector.

4.  Press the drive release latch (labeled with an arrow) forward 

.

5.  At the same time, push the drive toward the back of the computer

, then lift it out of the drive cage 

.

Removing a CD-ROM Drive from the Drive Cage

6.  Store the drive in antistatic packaging.

Summary of Contents for 133756-004 - Deskpro EN - 6550 Model 6400

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands