Hardware Reference Guide
2-13
Compaq Confidential - Need to Know Required
Writer:
Martha Rockecharlie
Part Number:
178171-xx2
File Name:
e-UpgradesSDT
Last Saved On:
07/25/00 9:22 AM
Last Saved By:
Kristen Cover
9. Gently rotate the drive cage back into the computer chassis.
CAUTION:
When returning the drive cage to its normal position, use
extreme caution to prevent damaging the data and power cables.
10. Replace the access panel.
11. Reconfigure the computer, if necessary. Refer to the
Computer
Setup
Guide
for more information.
If you normally lock the Smart Cover Lock, use Computer Setup to
relock the lock and enable the Smart Cover Sensor.
Installing a Hard Drive
CAUTION:
To prevent loss of work and damage to the computer or
drive:
If you are inserting or removing a hard drive, turn off
the computer. Do not remove a hard drive while the
computer is on or in standby mode.
Before handling a drive, ensure that you are
discharged of static electricity. While handling a drive,
avoid touching the connector. For more information
about preventing electrostatic damage, refer to
Appendix E, “Electrostatic Discharge.”
Handle a drive carefully, do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature
extremes, or products that have magnetic fields such
as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-
pack mailer or other suitable protective packaging and
label the package “Fragile: Handle With Care.”
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock and disable the Smart Cover Sensor.
2. Shut down the operating system properly, turn off the computer,
disconnect the power cord from the electrical outlet, and remove
the computer cover.
3. Rotate the drive cage to the upright position.
4. Install two guide screws on each side of the drive.
5. Pull the green release lever into its upright position.
Summary of Contents for 133756-004 - Deskpro EN - 6550 Model 6400
Page 1: ...rence Guide sonal Computers ...
Page 48: ......