Restoring Factory Defaults
If at any time you wish to return to the default setting, scan the ENTER SETUP barcode followed by
the RESTORE DEFAULT SETTINGS barcode, and then the UPDATE barcode. This will restore all the
factory default settings.
For any problems programming the scanner, the first troubleshooting step is to restore
factory defaults.
ENTER SETUP
RESTORE DEFAULT SETTINGS
UPDATE
Scanning the RESTORE DEFAULT SETTINGS will clear the pairing as well. The scanner must be paired
to the cradle again before use. You can set the connection by scanning the SET CONNECTION
barcode on the bottom of the cradle and then scanning the SERIAL barcode. A SET CONNECTION
barcode is provided below.
SET CONNECTION
IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner
Page of
6
12
