Valve
Cartridge Guide
7
companionleisure.com.au
HANDlING WHEN SAFETy DEvICE MECHANISM WORkS
If the range is used in a hot area and the internal gas pressure of cartridge increases more than
5-7kg/cm
2
(normal pressure 2-3kg/cm
2
) a built-in safety device (pressure sensor device) blocks out
and cuts off the gas flow to extinguish the flame.
To re-ignite burner, remove cartridge from gas range. Turn knob to ON position to remove excess
gas from valve. After 5 minutes reset safety device by pushing down and replacing cartridge.
Repeat ignition procedure until ignition begins.
Problem
No
Ignition
No
Burning
Unstable
Flame
Uneven
Flame
Slow
Burning
Gas
Smell
Stopped
working
while in
use
Continue
Burning
Solution
Cause
Lack of Fuel
✔
✔
✔
✔
Replace Cartridge
Spark point dirty
✔
Wipe off dirt
Dirty burner
✔
✔
✔
✔
✔
✔
Clean the burner
Imperfect refill
alignment
✔
✔
✔
✔
Reset correctly
Dirty burner
cartridge
✔
✔
✔
✔
✔
Request for inspection
repair
Faulty Knob
✔
✔
Request for inspection
service
Internal gas
pressure too high
✔
Cool down gas
Function of safety
stop mechanism
✔
✔
Remove any causes
and reset
Improper setting
of spark point
✔
Set spark point to
2mm (5/64”) away
from burner
TROUBlESHOOTING
