OWNERS MANUAL
3
IMPORTANT
• Use outdoors only.
• Keep children away at all times.
• CAUTION: Accessible parts may be very hot. Please take care when handling or moving the appliance.
• Appliance is to be used on a stable, level, flat, non-flammable surface. The appliance should be
protected from direct drafts and in a well ventilated place.
• Only cooking vessels with a minimum diameter of 180mm and a maximum of 200mm are to be used
with this appliance.
• Take care that the primary air intakes, located on the burner tube of this appliance are not obstructed,
or that air flow is restricted by placing items or other appliances close to or adjacent to the inlets.
• If you smell gas, immediately turn the gas off at the cylinder and move the appliance and cylinder
to a well ventilated area outside, keeping well away from sources of heat such as naked flames and
pilot lights.
• Do not attempt to move or relocate the appliance when it is operating, extinguish the burner and allow
to cool, disengage the gas cylinder then move the appliance.
CHECKING FOR GAS LEAKS
• Check that all connections are tight and that the gas cylinder connection has been
tightened before you turn the cylinder gas valve on.
•
NEVER
check for leaks with a flame or pilot light.
• Using Companion Gas Leak Detection Spray or soapy water, coat all connections,
if bubbles appear turn the cylinder gas control off and retighten the connection
before re-testing.
• Inspect the appliance regularly for signs of wear, leaks or incorrect operation.
If symptoms such as flaring of the burner, issues with lighting, damages to hoses
or connections or leaks from seals or gas controls are identified do not attempt
to repair, return to your authorised stockist for service and maintenance.
CHANGING GAS CYLINDER
• To check if gas remains in the cylinder, disconnect from the appliance and hold the cylinder in a vertical
position then shake from side to side, if there is a sound or feel of liquid movement inside, the cylinder
contains gas.
• When changing gas cylinders ensure this is conducted outside in a well ventilated location free from
people, animals and ignition sources such as naked flames, pilot lights and electrical equipment with
heaters or elements.
