6
inStaLLation of tHe appLiance
• This appliance is fitted with leg supports located at the front of the appliance, it is
important that these supports are locked in position every time that the appliance
is in operation.
• Install the appliance on a firm, level, horizontal surface. To level the appliance,
use a spirit level or a vessel containing water, if necessary.
• Avoid installing the appliance in direct sunlight or near any source of heat.
• The distance between the rear of the appliance and a wall should not be less
than 100mm and the minimum ventilating space from the sides of the appliance
should never be less than 100mm.
• The location should be protected from rain and splashing.
• A good level of air circulation is required to ensure maximum performance, do not
obstruct the ventilation grids of the upper, lower or rear surface of the appliance.
• Complying with the above will ensure efficient and economical cooling of the unit.
• Before first use of the appliance, clean the inside and the cover of the appliance
with warm water.
• Never use an abrasive product.