8
operating inStructionS to turn on
Please read the instruction manual in its entirety before operating
the heater. Failure to follow the precautions and instructions may
result in death, serious injury and property loss. Only persons who
understand and follow the instructions should use the gas heater.
step 1.
Pull out the two front feet. Put the heater on a firm and
flat surface. Make sure the control knob is at the LOW
position and the cartridge lever is at the OFF position.
Open the cartridge cover.
step 2.
Locate the handle in the down position. Fit gas cartridge
ensuring that the locating tab (A) on the regulator is
positioned in the cut out on the cartridge.
step 3.
Make sure the Control Knob is at the LOW position.
Press the Cartridge Lever to the ON position.
step 4.
Turn the Control Knob anti-clockwise towards the IGNITE
direction until you hear a “click” sound. If the flame is
on, hold the Control Knob 10 seconds.
step 5.
If the flame fails, release the Control Knob and try
another “click” until the flame is on. Turn the Control
Knob to the desired position to get your ideal heat
output.
1
3
2
4
5
A
A