- 23 -
5.6 USE CHOKE
Pull the Choke Knob 1 fully out to "START" position.
NOTE
The Choke is not required to start a warm engine. Push the
Choke Knob into the "RUN" position.
Usually keep the Choke Knob in "START" position for only 2
pulls of the recoil starter or 2 pushes of the electric start
button. After second pull or push, push Choke Knob into the
"RUN" position for up to the next 3 pulls or pushes. Too much
choke leads to spark plug failure/engine flooding due to the
lack of incoming air. This will cause the engine not to start.
Keep the Choke Knob in "START" position for more pulls or
pushes if weather is cold.
1
"START" position
"RUN" position
Summary of Contents for COMP2100W
