background image

2

GENERAL WARNINGS

 

•   This appliance shall only be connected to a cylinder with 3/8” gas cylinder  
  valve certified to AS2469 standards.
•   This appliance is designed for outdoor use only and must be operated a  
  minimum of 1000mm from any flammable material or surfaces and materials.
•   This appliance is to be stored in a dry and well ventilated location  
  free from direct sunlight.
•   Do not store when valve is still connected to the cylinder.
•   Make sure that the cylinder is disconnected and is stored in a well-ventilated  
  area, free from direct sunlight, heat and ignition sources.
•   If cylinder is being stored indoors, ensure that the indoor storage location  
  complies with the standard AS / NZS1596
•   This appliance must only be serviced by an authorised service agent, return  
  to your place of purchase for
  service and repair.

IMPORTANT

read these instructions for use carefully.
Familiarise yourself with the appliance before connecting it to a gas container.
Keep these instructions for future reference.
when unpacking appliance remove any packaging etc from around appliance & ensure 
pot support is correctly positioned

DANGER!

•   During operation all surfaces will be extremely hot and should not be  
  touched or handled.
•   Do not use the appliance if it has a leak, worn, deteriorated or damaged seals.
•   Handle with care even after brief use; always pick up using the handles  
  not the cylinder.

Summary of Contents for COMP2012













Reviews: