background image

10

CARE INSTRUCTIONS

Using warm soapy water with a mild detergent wipe down all surfaces and areas of the 
appliance, taking care not to allow water to enter the burner outlets or aeration holes 
located in the burner tube.

DO nOt suBMerGe tHe aPPlIanCe In a sInK Or BOwl
DO nOt use aBrasIVe Cleaners Or BleaCH

MAINTENANCE AND SERVICE

•   During operation if it is noted that the burner flame is unstable, is changing  

 

  colour from Blue to Yellow or has a distinct smell it is important that you take    
  the appliance to your local authorised gas appliance repairer for inspection.
•   Periodically check the gas control is tight and has no leaks, follow the testing    
  for leaks procedure. Check the gas hose & regulator for any signs of wear, cuts    
  or fraying, if identified replace immediately with a Gas Certified replacement    
  hose and/ or regulator
•   For further information or assistance please contact customer service.

SPECIFICATIONS

Dimensions

645W x 297L x 159hmm

Gas Type

Propane

Consumption Total

24Mj/hr – Total (12Mj/hr per burner)

Inject Size

0.37mm

Certificate

SAi-400049

Weight

8.8Kg

Summary of Contents for COMP2012













Reviews: