Compal ACY25 series, Service Manual

Page: 6 / 175

ACPI CarBus Controller ENE CB1420
•
ACPI-PCI Bus Power Management Interface specification Rev 1.1 Compliant
•
Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, and PME#, AND
CardBus CCLKRUN#
•
Compliant with PCI specification v2.2, PC Card Standard 7.0 and JEIDA 4.1
•
Yenta
TM
PCI to PCMCIA CardBus Bridge register compatible
•
ExCA (Exchangeable Card Architeture) compatible registers mappable in memory and I/O
space
•
Intel
TM
82365SL PCIC Register Compatible
•
Supports PCMCIA_ATA Specification
•
Supports 5V/3.3V PC Cards and 3.3V CardBus cards
•
Supports single PC Card or CarBus slot with hot insertion and removal
•
Supports multiple FIFOs for PCI/CardBus data transfer
•
Supports Direct Memory Access for PC/PCI and PCI/Way on PC Card socket
•
Programmable interrupt protocol: PCI, PCI+ISA, PCI/Way or PC/PCI interrupt signaling
modes
•
Win’98 IRQ and PC-98/99 compliant
•
D3
cold
state PME# wakeup support
•
3.3Vaux Power Support
•
Integrated PC 98-Subsystem Vendor ID support, with auto lock bit
Floppy Disk Drive
•
3.5"1.44MB, 3 mode as an I/O module
Hard Disk Drive
•
2.5" up to 40 GB, 9.5mm height
CD-ROM Module
•
12.7mm height module
•
CD-ROM, DVD, CDRW,COMBO
•
24X CD_ROM
Audio Port
MIC IN
•
AC-coupled input,100mVP-P maximum
Line out
•
1V
P-P
Built-in Microphone
•
Sensitivity-45dB
•
S/N:58dB
Built-in Speakers
•
8
Ω
, 1W (resonant frequency 460HZ) speakerX2
Built-in Speakers
•
8
Ω
, 1W (resonant frequency 460HZ) speakerX2
Chapter 1-6