Compal ACY25 series, Service Manual

Page: 25 / 175

Chapter 2-16
System Devices
PhoenixBIOS Setup Utility
Main System Devices Security Boot Info. Exit
Item specific Help
PS/2 Pointing Device [Both]
Serial Port: [Enabled]
Base I/O address [3F8h]
Interrupt [IRQ4]
Parallel Port: [Enabled]
Mode: [ECP]
Base I/O address: [378h]
Interrupt [IRQ7]
ECP DMA channel: [DMA1]
Intel® SpeedStep™ Technology [ Automatic]
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup defaults
Esc Exit
←→
Select Menu Enter Select
4
Sub-Menu F10 Save and Exit
PS/2 Pointing Device
Configures the integrated internal pointing device using options:
Auto-Selected: If an external PS/2 mouse is connected to the system, then disable the
internal pointing device. Otherwise enable the onboard pointing device.
When an external PS/2 mouse is warm/hot plugged into the PS/2 mouse
port, the internal pointing device will be disabled.
Both:
The internal pointing device is always enabled. Any external pointing
device connected will also be enabled at the same time.
Serial Port
Disabled /Enabled /Auto
Base I/O address
3F8h /2F8h/3E8h/2E8h
Interrupt
IRQ3/ IRQ4
Parallel Port
Disabled/ Enabled /Auto
Mode