Compal ACY25 series, Service Manual

Page: 24 / 175

Chapter 2-15
The Floppy Drive status is auto detected by system.
1.44MB, 3
1/2
“ If there exists floppy drive.
Not installed If there is no floppy drive.
Internal Hard Disk
The hard disk types and capacity are auto detected and set by the system. If there is no hard
disk present or unknown type,
″
None
″
should be shown on this field, otherwise the capacity
must be shown.
ATAPI Device
The CD-ROM, DVD-ROM or CD-RW are auto detected and set by the system. If there is no
ATAPI Device present or unknown type,
″
None
″
should be shown on this field, otherwise the
model name must be shown.
Boot Display Device
Both: Simultaneously enable both the integrated LCD screen and the system’s external
video port (for an external CRT or projector).
Auto-Selected: During power on process, the system will detect if any display device is
connected on external video port. If any external display device is connected,
the power on display will be in CRT (or projector) only mode. Otherwise it will
be in LCD only mode.
Screen Expansion:
Enabled:
Disabled:
VGA Memory
VGA Memory size = 16/32/64 MB.
The default value is set to 32 MB.
Television Type:
NTSC: TV is NTSC standard
PAL: TV is PAL standard
Intel® SpeedStep™ Technology:
Automatic:, / Maximum Performance / Battery Optimized / Reversed
NOTE : The sub-items under each device will not be shown if the device control is set to
disable or auto. This is because the user is not allowed to control the settings in these cases.