background image

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 12/02/2021 | K07173H01

24

9.

 OPERATION

The grinding pause can be activated 

or deactivated by pressing the lower 

coffee dose button  ( ). To do this, we 

access 

MENU / CONFIGURE SETTINGS / 

CONFIGURE GRIND PAUSE.

In this operating mode, the grinding pause 

can also be carried out by pressing the 

active icon on the LCD screen  ( ). This 

pause can be activated or deactivated 

through the menu.

* (Only available on models with the possibility of offering 

three doses).

 

9.6. 

PORTAFILTER RECOGNITION 

MODE

In this operating mode, the grinder detects 

the presence of the portafilter through 

the movement of a fitted Tag. When the 

portafilter with the mounted Tag comes 

in range, the system identifies it and 

automatically grinds DOSE 2 by pressing 

the lower portafilter button ( ) once. 

Once Dose 2 is detected, you have 20 

seconds to press the lower button ( ). 

If you want to cancel the selection, you 

can press 1 or 3 (in models with 3-Step 

keyboard) on the selection buttons (     ).     

If after 20 seconds, the lower button ( ) is not 

pressed, the grinder will return to standby 

mode with the message “Insert Filter 

Holder” on the display.

9.7. 

DOSE BUTTON (GRIND O REFILL)

If you keep pressing the fill ( ) or refill  (

), button, you can manually fill the holder 

with the desired amount of coffee, having 

much more control of the quantity with the 

refill option.

15

Summary of Contents for PKE











































Reviews: