Compac ComTank, Installation Sheet, Page: 7 / 18

Installation
Compac Industries Ltd. Page 7 www.compac.co.nz
Installation
You must be properly qualified, trained and authorised to install this
unit. Ensure you are qualified to perform each of the operations described.
Security
To help prevent unauthorised tampering, it is recommended that tamper resistant
fasteners be used and that all wiring outside the cabinet is enclosed.
Tools Required
Tools
It is expected that installers will carry a comprehensive tool kit including:
 Metric and imperial spanners
 Metric and imperial socket set
 Metric and imperial allen keys
 Torx and security torx keys
 Phillips, pozidriv and flat blade screwdrivers
Power Tools
 Electric drill (observe site safety protocols when using power tools)
Electrical Tools
 Wire cutters
 Wire stripper
 Crimping tool
 EPROM extractor
 Multimeter
 Earthing wrist strap
Diagnostic Equipment

Remote pump display to enable easier pump setup.
 Laptop with fully charged battery and wireless modem

LAN cable
 Fully charged cell phone

Test cards and/or authorisation keys
Safety Equipment
 High visibility vest or jacket
 Personal protective equipment (PPE) Boots, gloves, goggles, hearing
protection, hard hat etc.
 Cones, barriers, tape to secure your working area
Other Equipment
 Step ladder
 Torch
 Cable ties
 Cleaning spray and clean cloths
The above list is a suggested minimum. It is recommended that you read the manual
thoroughly and include any other equipment that may assist you in completing the
job safely and quickly.