INS_NW7[E]/M_REV– 06/10/13 PAGE 29
INSTALLATION AND OPERATION MANUAL
NW7[E]/M
TECH SUPPORT: 1.888.678.9427
10.3.3 Telnet
Figure 25: Telnet settings in the System » Administration page.
Telnet
Provides administrator tools for controlling the device or network debugging, over an
unencrypted connection.
Port
Specifies the listening port, the default being 23.
To start using Telnet, enter the command “telnet 192.168.10.101” or “telnet 192.168.10.101 23”
into a Command Prompt if using Windows, or into a Terminal if using Linux or Mac OS X.
10.3.4 Web
Figure 26: The device's web server mode and port.
Web Server
Mode
This can be set to Hypertext Transfer Protocol (HTTP) or Hypertext Transfer Protocol
Secure (HTTPS). For HTTPS, if you see the warning, “The certificate is not trusted
because it is self-signed. The certificate is only valid for OpenWRT,” click “Add
Exception”, “Confirm Security Exception” and proceed.
Port
Specifies the listening port, the default being 80 for HTTP and 443 for HTTPS.
