INS_NW(1,2)/M_REV– 06/10/13 PAGE 34
INSTALLATION AND OPERATION MANUAL
NW(1,2)/M
TECH SUPPORT: 1.888.678.9427
SNMP V3 Privacy Password Sets the password for data encryption. (default: password)
Trap
Figure 30: SNMP trap configuration.
Enable SNMP Trap
Allows the SNMP agent to notify the SNMP manager of events.
SNMP Trap IP Address
Sets the IP address of the SNMP manager which receives the trap
messages.
SNMP Trap Port
Sets the port number.
10.6 Reset Button
The reset button is a physical hardware button on the AP hardware board. Depending on how
long the button is pressed, you can reboot the board or reset it to factory default. First make
sure that the power is on and wait a minute for the board to finish starting up. The following table
shows the duration of the button press and the corresponding action.
Button Press Duration Effect
0 - 3 seconds
Reboot
4 - 30 seconds
Reset to factory default
