INS_NW(1,2)/M_REV– 06/10/13 PAGE 20
INSTALLATION AND OPERATION MANUAL
NW(1,2)/M
TECH SUPPORT: 1.888.678.9427
9.4 Wireless (for Station Mode)
The following describes the parameters for a device operating in Station mode.
Figure 6: A summary in the Wireless section for a device operating as an 802.11 station.
SSID
Displays the name of the wireless network that this station should be associated with.
Mode
This is 'Client' if the device is in Station WDS mode.
Channel
Shows the channel number and frequency that this station is using. Normally, it would
automatically select the same channel as the AP.
Bitrate
This is the maximum bitrate supported by the radio in the current configuration.
MAC-Address
States the MAC address of the device's radio.
BSSID
This is the MAC address of the AP's radio.
Encryption
Displays the wireless encryption used.
ACK Timeout
Shows the maximum acknowledgment time in microseconds.
DFS Status
If DFS is enabled, the AP automatically switches channel if radar is detected on the
current channel.
TX-CCQ
Displays the transmission quality in %. A higher percentage means a better wireless
connection quality.
RX Rate
Shows the receive bit rate of this station.
TX Rate
Shows the transmit bit rate of this station.
