INS_CLFEXUTP_REV–
09/28/11
PAGE 2
CAT5/6
UTP
CAT5/6 or UTP
CAT5/6
CAT5/6
FIGURE 1 – CLFE1UTP
FIGURE 3 – CLFE4UTP
FIGURE 2 – CLFE1UTP
INSTALLATION AND OPERATION MANUAL
CLFE(X)UTP
RIGHT PANEL
LEFT PANEL
LEFT PANEL
RIGHT PANEL
TECh SUPPORT: 1.888.678.9427
For 1-pair mode, use the first pair of pins (pins 1 & 2) of the
“Extended Ethernet” RJ-45 port on the left panel.
Note:
4-pair mode is required for PoE.
* WARNING: A ground connection is
required for the surge protection to work.
Failure to ground properly voids the
warranty and may cause damage.
* WARNING: A ground connection is
required for the surge protection to work.
Failure to ground properly voids the
warranty and may cause damage.
2 1
Ground
Screw*
Ground
Screw*
PoWER SUPPLy
CoNNECTIoN
via external power adaptor
Optional, if there
is no power supply
connected to the unit
it will try to detect PoE.
–
+
Note: Center
pin on power
connector is
positive (+).
