VERIS 6/8/26/28
Yoke Mounting Bracket
The compact VERIS models
VERIS 6
,
VERIS 8
,
VERIS 26
and
VERIS 28
conveniently include a yoke-style
mounting bracket for horizontal or vertical mounting, plus optional stand-offs to achieve a 10° or 20°
downward vertical tilt. The yoke bracket is fitted with a series of mounting holes as shown in Figure 1 to
allow the installer to vary the distance from the enclosure to the mounting surface in order to suit the
requirements of the installation. It is engineered to provide a high margin of safety when supporting a
VERIS 6/8/26/28 loudspeaker. Yokes are manufactured of steel, covered with a durable powder-coat finish,
and are included with the loudspeaker in either black or white to match the color of the enclosure.
Figure 1: VERIS Loudspeaker and Mounting Yoke
VERIS 8
LOUDSPEAKER
10° OR 20°
METAL STAND-OFF
(FOR DOWNWARD VERTICAL TILT)
YOKE BRACKET
SERIES OF YOKE MOUNTING HOLES TO
VARY THE DISTANCE OF THE ENCLOSURE
TO THE MOUNTIN G SURFACE
“LONG CORNER”
OF YOKE
“SHORT CORNER”
OF YOKE
Warning:
VERIS rigging fittings are rated at a Working Load Limit of 100 lbs (45 kg) with a 10:1
safety margin. No single rigging fitting should ever be subjected to a load that is greater than 50
lbs. When multiple enclosures are suspended one above the other, it is the installer’s responsibility
to insure that the combined weight load does not exceed the Working Load Limit on any one rigging fitting.
This is particularly important if the enclosures are angled steeply downward (or upward), as most or all of
the weight may be supported by the rear (or front) points only. Failure to heed this warning could result in
injury or death!