Community VERIS Series - Operation and Installation Manual - Page 28
VERIS MOUNTING BRACKETS AND ACCESSORIES
Below are descriptions of mounting brackets, suspension kits and other accessories
manufactured by Community for use with VERIS loudspeakers. In this section the terms
“suspension” and “fly” mean the same thing: to elevate the loudspeaker enclosure above
the ground surface. Consult the user’s guide included with each part for detailed safety
instructions. It is the responsibility of the installer to insure that safe installation practices
are followed. Installation of loudspeakers should only be performed by trained and
qualified personnel. It is strongly recommended that a licensed and certified professional
structural engineer approve the mounting design.
IMPORTANT:
All rigging fittings should remain sealed, otherwise air leaks will occur in the
enclosure that can compromise the low-frequency performance with distortion and reduced
output.
WARNING:
VERIS rigging fittings are rated at a Working Load Limit of 100 lbs (45.4kg)
with a 10:1 safety margin. No single rigging fitting should ever be subjected to a load that
is greater than 100 lbs. Failure to heed this warning could result in injury or death!
VERIS Handle & Stand Socket
Model No. V-HSS
The V-HSS accessory for VERIS 6/26/8/28 attaches to the
loudspeaker enclosure's rear M6 threaded fittings to create a
stand socket mount and convenient carrying handle. It is
zinc plated and made of black powder coated steel. Perfect
for A/V professionals.
Seat Track Kit
Model No. STKIT
A Seat Track Kit is available that fits all models of VERIS full-
range loudspeakers. The STKIT provides a safe and
convenient means of suspending a single enclosure. By
purchasing multiple kits, one enclosure may be safely
suspended over another.
Ceiling Mount Kit
Model No. CMKIT
The Ceiling Mount Kit creates a hang point from a ceiling
surface. The CMKIT consists of a ceiling mount bracket and
a bolt that fastens to a U-yoke bracket or to one of several
optional loudspeaker brackets. It can be used with all full-
range VERIS loudspeakers. Note: The yoke is sold
separately for VERIS 12/15/32/35. The yoke is included with
VERIS 6/26/8/28.