EmulationEngine 11a/b/g User's Guide
080104
5-9
!"
Complete steps 1) through 4) as described above for “Creating an Internal
Mode Test”.
!"
In Step 5), select “External” in the “Traffic Source” field and select the
Layer 2 radio button to capture frames based on 802.3 MAC source
address or the Layer 3 radio button to capture frames based on IP source
address.
!"
Click the Create button to create the scenario for an external mode test.
Running a Test
Click this button in the toolbar to run the scenario/test for all groups
and all virtual stations in a scenario.
Click this button in the toolbar to run a test for selected virtual
stations or groups.
If you created a new scenario and have not yet joined with a target
system, the following dialog will be displayed:
Click “Yes” to show the Select System Under Test dialog and join with the
System Under Test.
If you created a new scenario and have not saved it using the Save
Scenario option in the File menu, a dialog will prompt you to save the
scenario.
Select “Yes” to save the scenario file. The Save Scenario dialog is
displayed:
