Communication Machinery Corporation (CMC)
4-4
080104
4) Select the COM port that is connected to the EmulationEngine from the
“Connect using” list box. Click OK to display the COM properties dialog:
5) Set the COM port settings as shown in this dialog: Bits per second:
9600, Data bits: 8, Parity: None, Stop bits: 1, Flow control: None.
6) Click OK to close the COM properties dialog.
The POST (Power On Self-Test) appears on the HyperTerminal screen a
few seconds after the EmulationEngine is connected to the power source.
POST...
Memory test : passed
Ethernet MAC register test : passed
