CommTech FASTCOM ESCC-PCI-335, Hardware Reference Manual

Page: 15 / 33

8
INSTALLATION
Important: Observe Electrostatic Discharge (ESD) precautions when handling the FASTCOM: ESCC-PCI-335
board.
1. Unpack the FASTCOM: ESCC-PCI-335. Keep the box and static bag for warranty repair returns.
2. Check the switches to be sure that they are set as illustrated below (Factory Switch Settings).
3. Select an open PCI slot in your PC.
4. After removing the blank bracket from your PC, install the FASTCOM: ESCC-PCI-335 in the PC by pressing
it firmly into the slot. Install the bracket screw to hold it firmly in place.
5. Re-install the cover on your PC.
FACTORY SWITCH SETTINGS
ON
1 2 3 4
ON-BOARD LOOPBACK CONTROL (SW1) NO LOOPBACK
SOFTWARE INSTALLATION
Select the link above to open the Installation Manual. Under FASTCOM: ESCC-PCI-335, select your operating
system and follow the instructions. When you are finished, select FASTCOM: ESCC-PCI-335 from the list at the
end of the FASTCOM: ESCC-PCI-335 section to return to this manual.