Page 3 of 28
© 2019 CommScope, Inc. All Rights Reserved
Maximum capacity of splices/trays
Trays are designed to hold SMOUV or ANT splice protectors depending on the type. A FAS is used in all splice trays. The
design of the tray provides bend control and makes sure the fiber cannot make bends smaller then radius 40 mm (1.57’’).
Minimum over length storage per splice side on the tray is 1.2m (47’’).
Tenio-B6 can accommodate up to 12 fiber splice trays (type S12 or A12). Each tray houses 12 fiber splices, for a capacity of
maximum
144 fiber
splices per closure.
Tenio-C6 can accommodate up to 8 fiber splice trays (type S24 or A24). Each tray houses 24 fiber splices for a capacity of
maximum
192 fiber
splices per closure.
Tenio-C6H can accommodate up to 12 fiber splice trays (type SLE). Each tray houses 24 fiber splices for a capacity of
maximum
288 fiber
splices per closure.
More information about tray types can be retrieved in installation instruction TC-1320-IP-A, and on the eCatalog.
Cable diameter range
The cable diameter of the TENIO ranges from
2-16mm (0.08-0.63’’)
.
Depending the required cable range, the enclosure can be composed of various combinations of dedicated cable seal
segments. The TENIO can hold in total 6 seal segments. Each seal segment (9 variants in total) is adapted to a specific cable
range. For an overview, refer to the eCatalog. These gel seals are put under pressure after installation by engaging the seal
mechanism. The seal mechanism exists of 2 latches to seal the dome on the base and a tightening system engaged with the
trigger to seal the cables.
Cable type
The TENIO is cable technology independent and can be used with various cable constructions for both feeder cable and drop
cable, including microsheath, dual strength member, central core, and loose buffer tube/subunit constructions.
4.1.
Sizes and dimensions
230mm (9’’)
129mm (5’’)
345mm
(13.6’’)
485mm
(19.1’’)
345mm
(13.6’’)
485mm
(19.1’’)
230mm (9’’)
129mm (5’’)
