TECP-91-005 • Issue 5 • October 2017
Page 18
6
OPERATION
6.1
Sliding Out Blade to First Position
To slide out a blade to the first (access) position, pull out the pull arm on the right side
of the panel until the blade contacts the first detent, as shown in
Figure 17. Sliding Out Blade to First (Access) Position
6.2
Accessing Connectors on Back of Adapter Pack
To access the connectors on the back of an adapter pack, use the following procedure
(refer to
):
1. Place index finger into the concave loop on the slide mechanism, place thumb on
the pull arm, and squeeze index finger and thumb together.
2. Slide out the blade until it stops in the second position, which permits the
connectors on the back of an adapter pack to be accessed.
PULL
ARM
26109-A
NOTE:
FOR CLARITY
FRONT DOOR
REMOVED
NOTE: BLADE IS
SHOWN HERE
IN FIRST POSITION
