CommScope SCIL-B, Installation Instruction, Page: 4 / 12

4
4.11 Mark the cable where blocking rings will be installed as
shown. Install the rings over the cable with the slit positioned
under the cable.
4.12 Wrap gel strip around cable between the two blocking
rings. Press first part of the strip onto the cable to ensure the
strip sticks to the cable firmly. Make sure the strip is wrapped
smoothly without twisting between layers.
4.13 Verify with a flat tool. Continue wrapping the strip
smoothly till the area between the two blocking rings is filled with
gel strip.
4.14 At the cable port where cable will be installed, install
two pieces of black tie wraps.
4.15 Position the cable with the pre-installed cable sealing
block into the cable port and insert the cable attachment bracket
into the holding slot as picture shown.
4.16 Secure the cable with the black tie wraps.
4.17 Apply unused cable ports with cable plugs. Wrap cable
plug with gel strip in the same way as wrapping cable.
50mm