3
4.3
Cut the strength member on both sides at a distance
of 50 mm from the cable window cut.
4.4
Install the strength member into the holding lug and
secure the lug to the cable attachment bracket with the bolt.
4.5
Terminate and secure the cable attachment bracket to
the cable sheath with the cable hose clamp.
4.6
Assure that the lug lip, the securing bolt and the hose
clamp head are positioned downwards to the bottom of the
closure. Protect the cable hose clamp and the termination with
some layers of PVC tape.
4.7
Clean the cable sheath with the cleaning tissue
4.8
Select the appropriate blocking rings according to the
cable outer diameter. It is preferred that the blocking ring is
slightly larger than the cable diameter.
4.9
Cut the selected rings on the mark.
4.10
Insert the cable attachment bracket into the bracket
holding slot as shown.
Summary of Contents for SCIL-B
Page 11: ...11 ...
