ADCP-96-806 • Issue 4 • July 2016
Page 2
© 2016
CommScope
. All Rights Reserved.
Revision History
List of Changes
Trademark Information
CommScope is a registered trademark of CommScope Inc.
Admonishments
Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
General Safety Precautions
ISSUE
DATE
REASON FOR CHANGE
1
4/2009
Original.
2
5/2011
Include 96-port version of cabinet.
3
11/2011
Include grounding kit torque specs and current contact information.
4
July 2016
Rebranded for CommScope
PAGE
IDENTIFIER
DESCRIPTION OF CHANGE
5, 6
–
Updated text and Figure 3 to include grounding kit torque specs
14
Section 7
Updated contact information.
Danger:
Danger is used to indicate the presence of a hazard that
will
cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning:
Warning is used to indicate the presence of a hazard that
can
cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution:
Caution is used to indicate the presence of a hazard that
will
or
can
cause minor
personal injury or property damage if the hazard is not avoided.
Danger:
Exposure to laser radiation can seriously damage the retina of the eye. Do not look
into the ends of any optical fiber. Do not assume the laser power is turned-off or that the fiber is
disconnected at the other end.
Caution:
Improper handling can damage fiber optic cables. Do not bend fiber optic cable more
sharply than the minimum recommended bend radius specified by the cable manufacturer when
installing fiber optic cables and patch cords. Do not apply more pulling force to the cable than
specified. Do not compress the fiber or allow it to kink.
