CommScope ERA
®
CAP MX Medium Power Carrier Access Point Installation Guide
M0203A5A_uc
Page 42
© November 2020 CommScope, Inc.
Installing CAP MXs
11
On lower right of the CAP MX-1, reinstall the M6x12 screw and its washers that you removed in
a
Slide first the M6 split-lock washer and then the M6 plain washer over the M6x12 screw.
b
Insert the M6x12 screw through the screw hole shown below, and screw it back into the CAP MX-1
chassis; torque to 11 N-m (100 in-lbs).
12
Repeat
on the left side of the CAP MX-1.
M6x12 bolt and washer set in hole
closest to mounting surface
