CommScope ERA
®
CAP MX Medium Power Carrier Access Point Installation Guide
M0203A5A_uc
Page 50
© November 2020 CommScope, Inc.
Installing CAP MXs
3
Remove the six neck screws (shown below) from the front cover of the Splice Box.
4
Open the Splice Box.
5
Attach an M4 x 25 pan-head screw to the upper hole, and two M4
x 25 pan-head screws to the holes in the lower corners of the
Splice Box.
6
Close the Splice Box.
7
Replace the six neck screws that you removed from the front
cover of the Splice Box in
.
8
Go to
