manualshive.com logo in svg

CommScope 760252002, User Manual

The CommScope 760252002 User Manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions and information to help you make the most of your CommScope 760252002 device. Get a clear understanding of its features and functionality with this downloadable manual.

Share
Download
background image

TC-96307-IP

Page 17

© 2022 

CommScope

. All Rights Reserved.

5.3.1

Mounting Bracket Position on Panel as Shipped

Figure 12

 shows the mounting bracket position when shipped.

Figure 12. Rack Mounting Position for 3.0-Inch Recess (Shipped Panel)

5.3.2

Mounting Bracket in 3.5-Inch Offset Position (Front of Rack Mounting)

Figure 13

 shows the mounting bracket in the 3.5-inch offset position for front of rack mounting.To 

mount a mounting bracket at this position, remove screws from holes marked “1” and remount the 
mounting bracket using the unmarked holes shown in 

Figure 13

.

Figure 13. Rack Mounting Position for 3.5-Inch Recess

5.3.3

Mounting Bracket in 6-Inch Offset Position (Front of Rack Mounting)

Figure 14

 shows the mounting bracket in the 6-inch offset position for front of rack mounting. To 

mount a mounting bracket at this position, remove screws from holes marked “1” and rotate the 
bracket 180 degrees. Reinstall 4 screws in holes marked “1”.

Figure 14. Rack Mounting Position for 6-Inch Recess

Note:

The holes used for this mounting location are marked “1”.

3.0 IN. (7.62 CM)

27536-A

27537-A

3.5 IN. (8.89 CM)

27538-A

6.0 IN. (15.24 CM)

Summary of Contents for 760252002



































Reviews:

No comments

Related manuals for 760252002

Brands by name

Popular brands

Load more brands