a
PPlications
IN-LINE OR SUBMERSED OPERATION
1. Verify that the pump size fits the application without dramatically restricting the flow.
Consult your local dealer or manufacturer’s guidelines for the proper size and model of
ViaAqua® pump.
2. Do not reduce the input diameter of the pump
3. You must incorporate a pre-filter when operation for a water circulation, waterfalls, ponds
and fountains.
4. Replace the impeller if there are any signs of damage or excess wear.
5. Failure to maintain a ViaAqua® pump will cause permanent damage to the impeller and/or
pump. Routine maintenance is of the utmost importance to keep you pump working well.
SUBMERSED
1. Place pump in the desired location
2. If place in a pond: Raise the pump off the bottom of the pond by a min. of 6 inches when
installing.
3. Use Teflon tape to connect the threaded pipe adapter to the output of the pump.
4. Place the gasket onto the barbed pipe adapter, now using Teflon tape hand tighten the
barbed pipe adapter to the threaded pipe the adapter.
5. Connect the flexible tubing to the barbed pipe adapter. Insure water tightness with a hose
clamp.
EXTERNAL
1. Place the pump in desired location
2. Using Teflon tape connect the threaded pipe adapter to the intake and output of the hydrant
water pump.
3. Place a gasket on the barbed pipe adapter, now using Teflon tape hand tighten the barbed
pipe adapter to the threaded pipe the adapter.
4. Connect the flexible tubing to the barbed pipe adapter. Insure water tightness with a hose
clamp.
5. Verify that there are not any kinks in the tubing
6. The intake must have an adequate strainer. Do to the water flow of the pump a large
strainer is required.
NOTE
* Since there are many manufactures of filtration systems, please refer to the
manufactures instructions for installation and guidelines.
* Due to the design of wet and dry filtration systems and sumps there is a high amount of
evaporation. Therefore, it’s the Aquarist’s sole responsibility to insure a proper water level
thus insuring the pump is fully submersed at all times.
* Float valves will sure a consistent water level at all times. See your local dealer for more
information.
Summary of Contents for ViaAqua Series
Page 5: ...Hydrant Pump Set up...
