Mounting Fixture on the Wall
5A
(fig 25).
Installation (continued)
For Direct to Wall:
☐
Align the horizontal tenon adapter (D) holes with the holes pre-drilled in the wall.
☐
Use proper bolts or wall anchors (not provided) for the type of wall, and tighten to
sufficient torque setting.
Wall mounting hardware (not provided)
(Use bolts or screws and anchors
suitable for the mounting surface.)
☐
Consult with qualified electrician to determine best mounting method and bolts for wall mount.
☐
If needed, use supplied electrical cable (MM) to extend wiring from wall or junction box.
Route electrical wires through the center hole in the horizontal tenon adapter (D).
CAUTION:
Do not use the bolts included in
the hardware kit for direct to wall (as they are
intended for hollow metal pole mounting. Use
bolts or screws and anchors suitable for the wall's
surface material. Consult with qualified
electrician to help determine best mounting
method and bolts for wall mount.
NOTE:
The light fixture has precision Type IV
forward throw optics, so when using extension
arm mount keep fixture in the 0° position.
23
MM
D
Optional extension wires
Use if needed to extend house
wires from wall through
the tenon arm pipe (D).
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
