20
(fig 22).
(fig 23).
TIP:
Hold stripped ends near each other and
align any frayed strands (do not twist wires).
Push the wires into wire nut (AA) and use your
fingers to twist the wire nut clockwise until tight.
Check for tightness by pulling wires.
Installation (continued)
4G
Mounting Fixture on Square Pole
Making electrical connections
Connect lighting fixture black wire to supply
black wire (line), lighting fixture white wire to
supply white wire (common), and the lighting
fixture green wire to the supply ground wire
(fig 22).
For the purple and gray fixture wires
individually terminate fixture’s purple and
gray wires with wire nuts to prevent shorting
(fig 22).
☐
☐
FOR NON-DIMMING ELECTRICAL WIRING
(Follow these steps when NOT wiring
to a 0-10V dimmer.)
FOR ELECTRICAL WIRING TO 0-10V DIMMER
(Follow these steps when wiring to a 0-10V dimmer.)
Black (Line)
White (Common)
Green (Ground)
Purple
(+)
Dimming
Gray
(-)
Dimming
Connect lighting fixture black wire to supply
black wire (line), lighting fixture white wire to
supply white wire (common), and the lighting
fixture green wire to the supply ground wire.
For dimming, when connecting to a 0-10V
dimmer, connect the lighting fixture purple
wire to the dimmer switch purple wire
(+ DIM) and the lighting fixture gray wire to
the dimmer switch gray wire (- DIM) (fig 23).
☐
☐
NOTE:
Leave purple and gray wires terminated and
separated when NOT connecting to a 0-10V dimmer.
DO NOT connect the purple and gray wires to any
other wires unless wiring to a 0-10V dimmer.
Black (Line)
White (Common)
Green (Ground)
Purple
(+)
Dimming
Gray
(-)
Dimming
