Commercial Electric 1006 316 035 Use And Care Manual Download Page 3

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

ENSURING THIS IS THE CORRECT WALL MOUNT FOR YOU

IMPORTANT:

 Review this section carefully before you proceed with this installation to ensure that this is the correct TV 

Wall Mount for you.

This TV Wall Mount is the correct wall mount for you if:

Your  TV  VESA size is equal to or no greater than 200 mm x 200 mm (7.9 in. x 7.9 in.).
Your TV (including any accessories) weighs less than 30 lbs (13.64 kg).

If your TV is greater than these TV VESA measurements and weighs more than 30 lbs (13.64 kg), then this TV Wall Mount is NOT
compatible with your TV.

PLANNING THE INSTALLATION

Compare all parts in the package with the Hardware Included and Package Contents lists in this manual.  If any part is missing or damaged, 
do not install this wall mount system and call customer service at 1-877-527-0313 or visit www.HomeDepot.com.
This wall mount bracket is compatible with VESA 75/100/200 mm mounting holes.

PLANNING THE WALL PLACEMENT

CAUTION:

 Ensure the wall you select is a weight-bearing wall. Failure to observe this precaution can result in serious physical 

injury and/or property damage. Consult a professional installer or contact customer service if you have any questions.

When selecting a wall to mount your display, keep the following in mind:

Select a place with easy access to power outlets, cable input sources, and connections for the speakers and accessories.

 

Select a weight-bearing wall. The wall must be able to safely support four times the combined load of the equipment and all
attached hardware and components.

PLANNING THE MOUNTING HEIGHT

The optimal viewing height is to center the display at eye level when seated. Many people consider this to be too low for a wall mount, and 
commonly use the following rule for placement:

Position the bottom of the display no higher than eye level when seated, and the top of the display no higher than eye level when
standing. Anything within these limits should normally provide a comfortable viewing experience.

the

7.9 in. (200 mm) MAX.

7.9 in. (200 mm) MAX.

Summary of Contents for 1006 316 035















Reviews: