background image

 

5 HOMEDEPOT.COM

 

 

Please contact 1-877-527-0313 for further assistance.

installation (continued)

Feeding the wires

nOTe:

 Put the gasket (BB) on any knock out hole on the 

fixture to better protect the wires.

nOTe:

 Hold the connection wires in place by the metal tabs 

on the wrap light housing (A),especially for the part from the 
knock out hole to the LED driver. Drop off of the connection 
wires will cause shadow on the diffuser surface.

 

Feed the electrical connection wires through 

      

any knock out hole, through the gasket (BB), 

       and then through the mounting bracket (AA).

Making the electrical    

connections

 

Insert the hot and neutral (black and white)

      

wires from the electrical box into the wire

      

connectors of the same color wires from the

      

housing (A).

 

Insert the grounding wire from the electrical

      

box into the wire connector attached to the

      

green wire from the housing (A).

Attaching the mounting        

bracket to the electrical box

 

Position the wires back inside the electrical box.

 

Mount the mounting bracket (AA) to the electrical 
box using the two electrical box screws (CC).

Metal tabs

Knock out hole

LED Driver

Wire
connectors

Wire
connectors

Summary of Contents for 1001820735

















Reviews: