8
Wall Sleeve Dimensions (W x H x D):
25
⁷⁄₈
" x 15
¹⁷⁄₃₂
" x 16
²³⁄₃₂
" (65.7 cm x 39.5 cm x 42.5 cm)
1.
Remove the front and back covers from the new wall sleeve.
NOTE:
Save the covers for future use to seal the wall sleeve if
the air conditioner is removed.
2.
See instructions provided with the wall sleeve for complete
installation of the wall sleeve and grille.
Complete Installation
1.
Assemble the trim frame by laying the 4 frame pieces face
down on a flat surface and snapping them securely together.
2.
Install the
¹⁄₈
" (3 mm) insulating foam around the inside edge
of the trim frame. Begin in the bottom left corner and place
the insulating foam around the entire inside of trim frame.
Check that the foam is flush with the bottom edge of the trim
frame.
3.
Slide the trim frame onto the air conditioner until the foam
makes a seal with the wall sleeve.
4.
Plug into a grounded 3 prong outlet.
5.
Press RESET on power supply cord.
Insert the 4 - #8 - 32 sheet metal screws (provided)
through the holes in the grille and into the wall sleeve.
A. Insulating foam seals
B. Trim frame
A
B
B
A. Trim frame against wall sleeve
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING