6
Wall Sleeve Dimensions (W x H x D):
25
¹⁄₂
" x 15
¹⁄₄
" x 17
¹⁄₂
" (64.8 cm x 38.7 cm x 44.5 cm),
25
³⁄₄
" x 16
⁷⁄₈
" x 18
⁵⁄₈
" (65.4 cm x 42.9 cm x 47.3 cm),
25
⁷⁄₈
" x 16
¹⁄₂
" x 17
¹⁄₂
" (65.7 cm x 41.9 cm x 44.5 cm) or
26" x 15
⁵⁄₈
" x 16
⁷⁄₈
" (66 cm x 39.7 cm x 42.9 cm)
1.
Remove the existing grille from the wall sleeve.
2.
Remove all debris from inside the wall sleeve.
3.
Insert new grille into wall sleeve.
NOTE:
Make sure that the word “Top” is readable from inside
the room.
4.
Using the grille as a template, mark locations of 2 holes on
each side of the wall sleeve. Drill
¹⁄₈
" (3 mm) holes into the wall
sleeve.
5.
Attach the rear grille using #8—32 sheet metal screws
(provided).
Wall Sleeve Dimensions:
26
³⁄₄
" x 15
³⁄₄
" x 15" (68 cm x 40 cm x 38.1 cm),
27" x 16
³⁄₄
" x 16
³⁄₄
" (68.6 cm x 42.6 cm x 42.6 cm), or
27" x 16
³⁄₄
" x 19
³⁄₄
" (68.6 cm x 42.6 cm x 50.2 cm)
These sleeves require a larger rear grille and installation parts
than the ones provided with this air conditioner. See your local
supplier for a kit to fit this size wall sleeve.
NOTE:
If you install your new air condtioner into this size wall
sleeve without using the kit, you will cause damage to your new
air conditioner and the warranty will be void.
Plastic Grille Installation
1.
Cut the plastic grille 26
¹⁄₂
" (67.3 cm) wide and 15
¹⁄₂
" (39.4 cm)
high.
2.
Place the plastic grille inside the wall sleeve at the rear flange.
3.
If needed, drill
¹⁄₈
" holes into the wall sleeve. Then fasten the
grille to the wall sleeve with the screws with washers.
4.
If existing wall sleeve has insulation that does not need to be
replaced, skip to Step 7. Otherwise, replace the insulation.
5.
Remove the backing from the horizontal insulation strip and
attach it to the inside of the wall sleeve.
6.
Remove the backing from the vertical insulation strip and
attach it to the inside front of the wall sleeve as shown below.
A. Drill
¹⁄₈
" holes into the wall sleeve.
Insert the four #8—32 sheet metal screws (provided)
through the holes in the grille and into the wall sleeve.
A
A
A. Vertical insulation strip
B. Horizontal insulation strip
AC Plastic Grille Install 2.eps
OR
A
B