11
Using the Remote Control
NOTE:
Remote control may vary in appearance.
NOTE:
Two AA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
Air Conditioner On or Off
Press POWER.
Mode
1.
Press MODE to choose Cool, Heat (on some models) or Fan
Only.
2.
Press POWER SAVER to choose Power Saver mode.
■
Cool, Heat (on some models), Fan Only or Power Saver—
you can adjust the fan speed.
Fan Speed
Press AUTO, HIGH, MID or LOW.
Temperature
To raise the temperature:
Press the plus button. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the plus
button, the temperature will increase 1º until it reaches 88°F
(31ºC).
To lower the temperature:
Press the minus button. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the
minus button, the temperature will decrease 1º until it reaches
66°F (19ºC).
Timer Delay
To set Timer for a 0.5- to 24-hour delay before air
conditioner turns Off (air conditioner must be ON):
1.
Press TIMER. Timer indicator light on air conditioner will
flash. Display on air conditioner will show remaining hours
before air conditioner will turn off.
2.
Press the plus or minus button to change delay time from
0.5 to 24 hours.
3.
Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on.