Page 11
INSTALLATION TO A COLD WATER SUPPLY BY SPLITTING
AN EXISTING CONNECTION
This type of connection can be used to split an existing connection such as one
established from a water source to a refrigerator ice maker.
• Use the Three Way Plastic Adapter that is included with the water dispenser for
this type of installation.
1. Turn off the cold water supply that is the source of water to your refrigerator line.
2. Cut the 1/4” plastic tube that is currently connected to your refrigerator or
icemaker.
3. Insert each cut end of the existing 1/4” plastic tube into one of the holes of the
Three Way Plastic Adapter as shown.
4. Insert one end of the 1/4” plastic tube that is supplied with the water cooler into
the third opening of the Three Way Plastic Adapter.
Note: Tube can be cut according to the appropriate length needed. End of tube
should be cut straight for proper fitting.
SET UP & USE
(Water Dispenser)
(Refrigerator water line)
(Water source)
