4
+61 2 9975 6001
13
FF FD 22
FF FC 22
FF FD 1F
FF FC 1F
FF FB 05
FF FE 05
FF FD 21
FF FC 21
FF FB 01
FF FE 01
FF FD 06
FF FC 06
FF FD 00
FF FC 00
FF FB 00
FF FE 00
FF FD 25
FF FC 25
3.1.3 Authentication (Optional)
If authentication details have been setup, the following request/response sequence will
occur. If no authentication details are configured, this step is skipped.
Authentication will be setup in the system menu in the screen, but is blank by default. The
double quotes in the table should be omitted. They are there to show any white space
required.
Request from Screen
Respond With
"login: "
<username>\r
"Password:"
<password>\r
<username> and <password> are substituted with the username and password.
3.1.4 Welcome (Required)
Once the session is ready, and any authentication is successful, a welcome message is sent
by the screen to inform the client that it can start sending commands.
The welcome message is:
Welcome to the CommBox Control Protocol\r
Humidity
Do not expose the product to rain and do not place it in an area with high humidity.
Please make sure that the indoor environment is dry and cool. Normal operating
humidity is 10%~90%RH.
Ventilation
Please put the product in a well-ventilated place, so that heat could be dissipated
easily.
Ensure that the product has enough space for ventilation. Space requirements: left,
right and rear > 10cm, top > 20cm.
Earphones
Before using earphones, please turn down the volume in advance.
Using earphones at high volume for a long period of time may affect your hearing.
Standby
After pressing the standby key, the product will enter the standby mode, but it will
not turn off.
Batteries
Please ensure that the batteries are properly disposed of or recycled after use.
Please keep the batteries away from children and do not throw the batteries into fire.
Cleaning Notes
There are vents located on the back cover of the product. Please do not use any
liquid or spray during cleaning.
Power Switch Status Signs
“I” means power on, “O” means power off.
Product Maintenance Notes
This product can be serviced only by a certified service engineer.