19
+61 2 9975 6001
13
FF FD 22
FF FC 22
FF FD 1F
FF FC 1F
FF FB 05
FF FE 05
FF FD 21
FF FC 21
FF FB 01
FF FE 01
FF FD 06
FF FC 06
FF FD 00
FF FC 00
FF FB 00
FF FE 00
FF FD 25
FF FC 25
3.1.3 Authentication (Optional)
If authentication details have been setup, the following request/response sequence will
occur. If no authentication details are configured, this step is skipped.
Authentication will be setup in the system menu in the screen, but is blank by default. The
double quotes in the table should be omitted. They are there to show any white space
required.
Request from Screen
Respond With
"login: "
<username>\r
"Password:"
<password>\r
<username> and <password> are substituted with the username and password.
3.1.4 Welcome (Required)
Once the session is ready, and any authentication is successful, a welcome message is sent
by the screen to inform the client that it can start sending commands.
The welcome message is:
Welcome to the CommBox Control Protocol\r
6.2.2.4 Adjust Tab
•
Press
the key on the
remote control to select the Adjust tab.
•
Press the
keys on the remote control or directly click with
the touch pen to select the function to be adjusted.
•
Press the Enter key on the remote control to enter the adjustment
mode, and press the
keys or directly click with the touch pen to
adjust each function. Press the Enter or Back keys to exit the
adjustment. You can also click the Auto button to adjust automatically.
•
Press the Back key on the remote control or click in the blank area
outside the tab with a touch pen to exit the
tab.