Step 14:
Mounting the panel,
Note: Panels over 75’’ in size will not work with this
product.
Lower the trolley to it’s lowest setting and tilt the frame to the horizontal position.
Using a minimum of two people (preferably four) lift the panel onto the trolley. Then from
the bottom secure the panel to the trolley using 4x 8x20mm bolts. Secure the top two bolts
then adjust the lower 974 bracket until the bottom two bolts line up. Once all the bolts are
secured in place but not fully tensioned raise the panel to the vertical position then full
tension all bolts including the 8x12mm bolt holding part 974 to the tilt brackets
Tilting the panel to adjust the viewing angle. Push out and lean back at the same time on
the locking bars. Allow them to slot into the required position once the viewing angle has
been achieved. Replete the process as required.
Step 15:
Stowing all excess cables. Wind up and neatly secure all excess cables into the
remaining storage place in part 973.
