Commax WDC-244L, User Manual

Page: 7 / 14

6
Installation
①
WDR-244DS : Connect 2 wires from a DC 12V Adaptor to 5 in Pic. 1-2 (non-polarity).
②
WDC-244L : Connect DC 5.0V Adaptor to 7 in Pic. 1-1.
③
Press 3 Paging button.
④
If WDC-244L and WDR-244DS are placed too close to each other, it may cause a hauling
sound.
Pairing
①
WDR-244DS
Press the paging button for 5 seconds or longer until you hear the sound of a single beep.
WDR-244DS is now in pairing mode.
②
WDC-244L
After connecting an adaptor, slide 5power switch to turn on the device. Press the paging
button For 5 seconds or longer until you hear the sound of a single beep. WDC-244L is now
in pairing mode. WDC-244L and WDR-244DS will be paired as both devices are in pairing
mode. As a double beep sounds the pairing is completed.
③
Initializing the pairing
WDR-244DS
Turn the power off by unplugging the adaptor. Turn the power back on and press the paging
button for 5 seconds until you hear the sound of a single beep. Press the paging button
4. Instruction Manual