Commax WDC-244L, User Manual

Page: 8 / 14

7
again for 5 seconds until you hear the sound of a triple beep which indicates the pairing is now ini-
tialized.
WDC-244L
Turn the power off by sliding the 5power switch located at the bottom of the device. While pressing
both 4Select button and 3Paging button, turn the power back on. The red LED is now blinking rap-
idly by period of 0.1 second to indicate WDC-244L is now in initializing mode. Press 6Volume switch
to set a factory default mode. WDC-244L with the sound of a triple beep to indicate it is now in facto-
ry default setting.
Paging and Talking
①
Press the paging button on WDR-244DS to page all the WDC-244L devices that are paired with this
device indicated by LED (blinking slowly).
②
As any one of the paired WDC-244L devices is answered, the paging tone stops and connection is
made. All other paired WDC-244L devices are now in standby mode indicated by LED (blinking rap-
idly).
③
To hang up, press the paging button on WDR-244DS or WDC-244L.
※
if none of WDC-244L devices answered the paging from WDR-244DS the paging sounds for 30 sec-
onds and all devices go in to standby mode.
※
The allowed time for talking mode is 3 minutes set by factory default settings.