1.
Power Connection: Use +12V Power supply (TB21)
2.
Reader port connection:
It allows to use separated power source for readers (important!
Use common ground among of controller board power and of reader power)
3.
Relay port connection (Form-C):
In case of Power Fail SECURE Lock(left) and in case of
Power Fail SAFE Lock(right). It is recommended to connect diode on the side of output
devices as shown in the above configuration to protect the control device from possible
damage by reversed power current from Lock or alarm devices.
4. Two state input port connection:
2 stated input ports to monitor controller box status
of AC FAIL, LOW BATTERY, TAMPER ALARM and more NO/NC option.
System Overview Diagram
C
able-Connection