10
▶
If the set is in “Y”, automatic recording lamp(Green) located in upper part of the
product is flashing. (the lamp of the other ROOM UNIT is also flashing at the same time)
5-6. Stored screen Deletion
This function is to delete all of unnecessary screen stored in the memory.
●
Press the REC./IMAGE button and switch to Whole memory del mode with the DOWN(
▼
)
and ENT button. Then select yes(Y) or no(N) with RIGHT(
▶
) button. All memory contents
are deleted after pressing ENT button.
▶
The Menu is out after pressing REC./IMAGE button.
5-7. Screen Adjustment
●
Press the MENU/SET button and switch to the screen adjustment mode after pressing ENT button.
●
Pressing the ENT button show the finger picture(
☞
), and then place it to be required
in adjustment mode with UP/ DOWN(
▲
,
▼
) button and press the ENT button again.
●
The level is increased or decreased with LEFT/RIGHT(
◀, ▶
) button and turn
back to the previous menu after pressing MENU/SET button again.
5-5. Automatic recording
This function is to store 1 cut of momentary screen automatically when the visitor
press the Call button at the door.
●
Press the REC./IMAGE button and enter into Auto record mode with DOWN(
▼
) and
ENT button. Then Select yes(Y) or no(N) with RIGHT(
▶
) button and then the Menu is
out after pressing REC./IMAGE button.
●
Switch to Time set mode with REC./IMAGE button with the DOWN (
▼
) and ENT button.
OSD:
Review
Time set
▶
Auto record
Del. Whole memory
Auto rec Y
OSD:
Review
Time set
Auto record
▶
Del.
Whole memory
Del.Whole memory Y
Push the enter
●
Place an arrow(
▲
) at the point to be adjusted with LEFT/RIGHT(
◀, ▶
) button
and adjust with UP/ DOWN(
▲
,
▼
) button.
●
A set is completed, press the ENT button to store, and then the Menu is out after
pressing REC. IMAGE button.
Summary of Contents for CAV-70BB
Page 17: ...14 Memo...
