Commax CAV-70BB, User Manual

Page: 11 / 17

8
3. Burglar function
This function is to execute burglar set by magnetic switch.
●
Press the MENU/SET button and set Yes(Y) or No(N) with the right(¢¹) button in burglar
set mode, and then the MENU is out after pressing MENU/SET button.
▶
It is available only in case that the magnetic switch connected to the main unit is closed.
(Holding time: 60 sec)
▶ If ‘Y’ is selected, red lights in all monitors is flashing simultaneously.
●
If the burglar function is required after the set is completed, a holding time is needed and
a siren sounds with OSD message. (Holding time to release: 30 sec)
▶
In release, press the ENT button according to the OSD menu, restore is available only
in case that the magnetic switch connected to the main unit is closed.
●
Press the REC./IMAGE button and menu out finish
▶
It is showed from the last stored screen and all 128 cuts are stored.
▶ Please be noted that an additional screen to be stored after completion of 128 cut stores,
the screen is removed from the first stored screen.
4. Review function
This function is to see the stored screen by manual or automatic.
●
Press the REC./IMAGE button and then enter into Review mode with ENT button.
●
Stored screens are showed per 6 screens and you can see 6 cuts in order with
the RIGHT(
▶
) button.
●
Place an arrow on 1 screen with the UP/DOWN(
▲ , ▼
) button to review it per 1 screen.
●
Every 1 screen is reproduced and showed per 1 cut in order with the RIGHT(
▶
) button.
OSD:
1 sereen
▶
6 sereen
OSD:
▶ 1 sereen
6 sereen